Acrylic house numbers
Easy to read, weatherproof, in the colour you want: we cut your house number from real acrylic glass — as separate digits, as a plate or in two colours. Tell us your number and you get a proposal with a fixed price.
- · Real acrylic glass
- · Made in Germany
- · UV-stable, does not yellow
- · Fixings included
Complete with fixings from €4
Which number should it be?
Enter your house number — the configurator shows proposals with a fixed price straight away. One sentence about what you want is optional and shapes the first proposal. No account.
- 1. Enter the number, add a wish if you like.
- 2. Proposals with a fixed price appear straight away.
- 3. Everything stays changeable: build, typeface, size, colour.
Examples from the range
Every sign is made from scratch. The examples show the build, the material and the price level — typeface, colour and size are adjusted for you.
Real acrylic glass, not a printed sign
We cut from cast acrylic glass in 3 and 5 mm. The colour is in the material, not in a coat of paint — a scratch never exposes a different colour.
60 colours and finishes
Deep black, white, grey, clear, matt and two-colour with a silver or gold look — all weatherproof, in 3 or 5 mm.
Made in Germany
Cut and checked in our own laser workshop. No middlemen, no import route, short lines when you have a question.
Clean cut edges
The laser leaves a smooth, glossy edge. Nothing is milled, sanded or painted afterwards.
Built for outdoors
Acrylic glass is the material used for skylight domes and weather shields: UV-stable, dimensionally stable and rust-free.
Does not yellow
Acrylic glass is UV-stable — it does not yellow in the sun the way other transparent plastics do. The colour runs through the material rather than sitting in a coat of paint that could flake off.
Weatherproof
Rain, frost and summer heat leave the material untouched. It does not rust and needs no care — wiping it down is enough.
Light and impact-resistant
Acrylic is much lighter than glass and does not shatter the way glass does. That is why a glued number holds reliably too.
Two ways to mount it — the hardware is included
Which one suits your sign depends on the build and the size. The mounting hardware is part of the price; you do not buy anything on top.
Glued, no drilling
For smooth, load-bearing surfaces. No hole is left in the facade and the sign sits flat. Single digits below 250 mm are always supplied for gluing — a screw head would be too dominant at that size.
Wall mount with a stand-off
Every fixing point is a 8 mm hole in the sign, covered by a 12 mm stainless-steel cap. The sign stands visibly off the wall and casts a shadow. On plates the points sit 12 mm in from the corners.
Cardboard drilling template
Every screwed sign comes with a full-size template: hold it against the wall, mark, drill. For loose digits the characters are cut out, so every digit sits straight the first time.
Builds and sizes
Character heights from 40 to 300 mm. Digits are allowed, plus a letter, a hyphen or a slash — so 12, 12a, 12-14 or 3/4.
Loose digits
Each digit is its own part and goes on the wall individually. The classic, quiet solution.
Cut-out plate
A plate with the number cut out of it — the wall behind shows through the digits.
Stencil-font plate
A plate with the number standing on it. Readable even where the wall is busy or patterned.
Railed sign
The digits stand solid between a continuous line above and below. Very easy to read, even from a distance.
Two-layer plate
Two layers: the cut-out number in front, a contrasting plate behind it. The classic stainless-steel look.
How it works
- 1
Configure
Enter the number — proposals with build, typeface, size and colour appear straight away.
- 2
See the price
Every variant carries its fixed price including fixings — it updates with every change.
- 3
Order
Into the basket and pay. Only your order starts production.
- 4
We make and ship it
We cut your sign and send it with the mounting hardware and the template.
Common questions
Does acrylic hold up outdoors?
Yes. Acrylic does not yellow in the sun and stands up to weather — which is why we use it for house numbers. It expands in heat, so always mount it with a little play so the sheet is never under tension.
How is the house number fixed to the wall?
Either glued or screwed with a wall mount. Screwed, every fixing point is a 8 mm hole covered by a 12 mm stainless-steel cap; the sign then stands visibly off the wall. The matching hardware comes with every sign.
Which builds are available?
Loose digits, a cut-out plate, a plain plate, a railed sign and a two-colour double plate. Typeface, colour and size are settled together with you.
When is the price fixed?
Straight away in the configurator. We calculate material, cutting length and size deterministically; the price shown is the fixed price including fixings and does not change at checkout.
Can I return a house number?
No. A house number made to your specification is a custom-made item, for which German law (§ 312g (2) no. 1 BGB) grants no right of withdrawal. That is why you see a true-to-scale preview before buying and confirm it explicitly at checkout.
Can it be done without drilling?
Yes. On a smooth, load-bearing surface we glue the sign, so no hole is left in the facade. Single digits below 250 mm are always supplied for gluing.
Which size is the right one?
Character heights from 40 to 300 mm are possible. As a rule of thumb: the further the wall stands from the street, the larger the number should be. Tell us the rough distance and we will suggest a height.
Are letters, hyphens or slashes possible?
Yes, 12a, 12-14 and 3/4 all work — up to 8 characters in total. We do not currently make pure name signs.
Which colours are available?
60 acrylic variants in 3 and 5 mm: from deep black and white through grey and clear to matt tones and a silver or gold look. The colour is in the material, not in a coat of paint.
What is included in the delivery?
The finished sign, the matching mounting hardware and — for screwed signs — a full-size cardboard drilling template.