Wooden table caddy
Everything for the table in one place: your shakers in matching holes, napkins, sugar sticks — with a handle for clearing and your logo on the side.
- · Holes to your shaker model
- · Napkin compartment, sticks compartment, handle
- · Fixed price and 3D preview instantly
How it works
- 1
Choose shakers
Contacto, fluted glass, square, WMF — or your own diameter at the base. Every hole gets 1.5 mm of clearance.
- 2
Fit it out
Napkin compartment by format or none, sticks compartment, handle and height — plus your logo.
- 3
Slot together
The parts arrive cut. Sides into the base, tray into the sides, shakers in — without glue.
Examples
- Napkins, two shakers, sticksfrom €51.37
- Cruet set with fluted glass shakersfrom €29.58
- Square shakers, no sticksfrom €41.70
- Bistro with cocktail napkinsfrom €34.31
What you can adjust
Shakers
Up to four holes, round or square depending on the model — or with your own diameter from 20 to 60 mm.
Napkins
A compartment to napkin format between handle and end side — or none, then two trays.
Sticks compartment
51 × 73 mm for toothpicks, sugar sticks or teaspoons.
Handle
A centre wall with a handle hole rises above the sides — so you can carry the caddy with one hand.
Logo
On the end side above the tray, engraved as a filled area or outline.
For your brand
With a brand in your account, logo and material are already set for every product — and you can find everything you ordered again.
Material & joints
Slotted together from poplar plywood (4 or 5 mm) or MDF (5 mm): the sides go through the base with tenons, the tray goes through the sides with tenons. No glue, no screws.
The surface stays raw. The caddy holds shakers and packaged items; it is not intended for direct contact with food. Wipe dry or with a barely damp cloth, not dishwasher safe.
Frequently asked questions
Will my shakers fit?
Choose your model from the list, or measure the diameter at the base and enter it (20–60 mm). Every hole gets 1.5 mm of clearance; square shakers get a square hole.
Are shakers included?
No — the caddy is made for your own shakers. The wooden parts are delivered.
How big will the caddy be?
The depth follows the napkin format, the length follows what you fit in it — at most 36 cm. You see the exact outer dimensions in the editor.
How does my logo get onto it?
Upload it as SVG, PDF or an image. We engrave it on the outside of the end side — as a filled area or an outline. You confirm that you are entitled to use it.
Do I have to glue anything?
No. All parts are slotted together with tenons and can be taken apart again for cleaning.
Can I reorder?
Yes. With the configuration number you reopen the same caddy; with a brand in your account you find everything under “My brands”.
Can I return it?
Every caddy is made to your specifications — as a made-to-measure product it is excluded from the right of withdrawal (§ 312g (2) no. 1 BGB).