Tea bag organizer with engraved varieties
No more drawer full of loose bags: every tea gets its own compartment with an engraved name. You grab the bottom bag with two fingers — and refill through the same opening.
- · Compartments in a grid — from 2 up to 40 varieties
- · Every variety engraved, with a decorative frame and matching font
- · To stand or hang on the wall, in wood or with an acrylic front panel
from €43.23
Design your organizer
AI-generatedMoments with tea
Mornings in the kitchen, evenings for two, with a granddaughter or at the office: the organizer makes the tea break easier — and nicer.
AI-generatedEight varieties on the wall, an arch over each column — within reach above the dining table.
AI-generatedWhich tea today? With a name above every compartment, even the little ones choose for themselves.
AI-generatedAt the office: three varieties, black acrylic front panel, Art Deco frame.
AI-generatedGrab at the bottom with two fingers — the stack slides down.
AI-generatedA gift with their favourite teas — already labelled when it is unwrapped.
The photos on this page are AI-generated illustrations for inspiration, not pictures of organizers we have made. The dimensions, material and price shown in the configurator are binding.
Why a tea bag organizer
Order at a glance
Every variety sits in its own compartment with its name engraved above — no searching, no jumble in the box.
With two fingers
The opening is at the bottom of the compartment: you grab the bottom bag and the stack slides down.
Refill from below
You push new bags in through the same opening — without opening or taking down the organizer.
Your teas, your style
Up to two lines per compartment with at most 24 characters, eight decorative frames and matching fonts for each.
How it works
One opening per compartment
Taking and refilling share one opening at the bottom — the area above stays free for the label.
Viewing slot
A narrow slot above the opening shows whether there are bags left in the compartment. If you don’t want it, just switch it off.
Hooked on, slotted or glued
Hooked on: hooks on the walls hold the front panel, and it stays removable. Slotted: tenons hold it tight. Glued: we glue the whole organizer in the workshop.
Finger notch or ledge
A notch in the shelf lets your finger under the bag — or the shelves stick out 20 mm in front of the panel as a small ledge.
Stand it or hang it
Keyholes in the back panel for a nail or screw. From 350 mm high the organizer is only available for hanging — it is just over 9 cm deep.
Decorative frame and font
None, plain, double, label, decorative, antique, Art Deco or ribbon — the frame applies to all compartments, the font suits the style.
Examples to get started
Every example is fully configured and priced — open it in the editor and adjust the teas, grid or material.
For the kitchen
3 × 1, 3 varieties
Three favourite teas in birch with an antique frame — as in the large photo.
from €42.86
Open as templateOn the wall
4 × 2, 8 varieties
Eight varieties on two tiers, an arch over each column and a decorative frame, with wall mounting.
from €87.77
Open as templateFor tea lovers
5 × 3, 15 varieties
Fifteen varieties on three tiers — black, green and herbal tea at a glance.
from €145.08
Open as templateFor the office
2 × 1, 2 varieties
Two varieties, black acrylic front panel on birch, Art Deco frame — small enough for any office kitchen.
from €47.80
Open as templateFor the shelf
6 × 1, 6 varieties
Six varieties side by side with an apothecary label and a small ledge in front of each compartment.
from €73.91
Open as templateAs a gift
4 × 1, 4 varieties
Four compartments with a ribbon frame, one of them bearing the recipient’s name.
from €52.55
Open as template
Eight decorative frames
The frame surrounds every label. Each style comes with matching fonts — the first one is the default.
- no frameFont: Helvetica Bold
- plain frameFont: Helvetica Bold
- double frameFont: Helvetica Bold
- label frameFont: Century Schoolbook Bold
- decorative frameFont: Zapf Chancery
- antique frameFont: Palatino Bold
- Art Deco frameFont: Avant Garde Demi
- ribbon frameFont: Zapf Chancery
Materials
The body is made of wood-based board; the front panel can be a different material — wood or coloured acrylic. On wood the engraving turns dark, on coloured acrylic light and matt.
Body
MDF, 3 mm · MDF, 5 mm · Birch, 3 mm
Front panel
Birch, 3 mm · MDF, 3 mm · Black acrylic, 3 mm · White acrylic, 3 mm · Red acrylic, 3 mm · Yellow acrylic, 3 mm · Blue acrylic, 3 mm · Green acrylic, 3 mm
See all materialsDimensions and facts
Each compartment is 70 mm wide and 85 mm deep inside — made for tea bags in envelopes. You choose the compartment height between 70 and 250 mm; each compartment holds roughly as many bags as its height divided by 4 mm.
Up to 8 columns side by side and 5 tiers on top of each other; all tiers have the same height.
The body slots together like a drawer insert: side walls, dividers and shelves interlock and plug into the back panel.
From 350 mm outer height the organizer can only be ordered with wall mounting — the configurator switches it on then.
Price from €43.23 for three varieties; the configurator shows the fixed price of your configuration instantly.
Made to order in our workshop, safely packed and with you in a few days — like all shape.tools products.
Frequently asked questions
How many tea bags fit in one compartment?
That depends on the compartment height: we count 4 mm per bag in its envelope. At 150 mm compartment height that is about 37 bags; you choose the compartment height between 70 and 250 mm.
Do pyramid bags or loose bags without an envelope fit?
The compartments are made for flat tea bags in envelopes: 70 mm wide and 85 mm deep inside. Pyramid bags are usually thicker and taller — please measure them before you order.
How do I refill it?
Through the same opening at the bottom that you take bags from: push a small stack of bags under the pile. The front panel stays where it is.
Can I hang the organizer on the wall?
Yes, with the wall mounting option: keyholes in the back panel for a nail or screw. From 350 mm high, mounting is required because the organizer is only just over 9 cm deep. Screws and nails are not included.
Can the front panel be acrylic — and is it glued then?
Yes, the front panel is available in coloured acrylic. Hooked on or slotted, it holds without glue; we can only glue it on wood, not on acrylic.
How do I care for the organizer?
Wipe it with a dry or slightly damp cloth. Wood and MDF don’t like moisture — no dishwasher, and don’t place it right next to the kettle.
How long does delivery take?
Like all shape.tools products, the organizer is made after you order and reaches you safely packed in a few days.
Do I have to assemble the organizer myself?
Delivered loose, you slot it together in a few minutes — every part has a small mark, no glue needed. If you’d rather not, order it glued by us.
Can I change the varieties later?
With the hooked-on front panel, yes: it can be removed, and you can order a new front panel with other varieties.
Can I return the organizer?
No — every organizer is made to your specifications with your tea names; under German law the right of withdrawal is excluded (§ 312g Abs. 2 Nr. 1 BGB).
Design your organizer
Choose the grid, enter your teas, pick a frame — 3D preview and fixed price instantly.
Design your organizerMore order: Custom drawer inserts