Decoflex veneer
5 variants, thicknesses: 0.6 mm. Cut on the P1–P3 formats, price shown live while you design.
- Laser cutting
- Vector engraving
- Raster engraving
kerf
The laser vaporizes material — the cutting gap varies with material and thickness. Cuts run centered on the drawn line; for shape.tools products we factor the kerf into your dimensions automatically.More in the glossary →P1–P3 sheet formats
Our three sheet formats: P1 = 181 × 181 mm, P2 = 384 × 384 mm, P3 = 790 × 384 mm. Your design has to fit on one of the sheets. For scale: a vinyl record cover sits between P1 and P2.More in the glossary →
How Decoflex veneer lasers
Standardised photos of the real material — same motifs, same light, so you can compare materials.
Test cuts 
Transparency 
Top view 
Engraving 
Cut edges
raster engraving
The laser fills an area line by line — like a printer. Ideal for logos and larger motifs. In your file: black filled areas, RGB(0, 0, 0).More in the glossary →vector engraving
The laser traces a line and engraves it into the material — precise, ideal for fine contours. In your file: red hairlines, RGB(255, 0, 0).More in the glossary →Good to know
Description
Decoflex is a real-wood veneer on a special paper backing. It is "cracked" parallel to the grain without the surface showing it — making it extremely flexible along the grain, so it veneers even curved shapes (minimum radius approx. 5 mm). Across the grain it keeps its stiffness, with less tendency to splinter.
Beyond curved and flat surfaces, Decoflex also works on its own: as book covers, in model making, for jewellery and accessories such as place mats.
The back is brown special paper roughly matching the veneer tone. The bonding meets the E1 standard and is water-resistant — Decoflex is still not suitable for outdoor use.
Processing
Decoflex glues onto the most varied surfaces. Without a veneer press, use a high-quality contact adhesive; with a press, PVA or formaldehyde glue works. Either way: don’t skimp on the glue.
For a perfect finish, give the veneer another fine sanding before varnishing — and only use solvent-based varnish, never water-based.
Bridges
For this material we generally recommend small bridges: interrupt the cut contour by at least 0.5–0.8 mm. For parts under 15 × 15 mm and filigree elements, bridges are essential — all parts stay safely in the sheet until they reach you.
Variants & sheet prices
| Color / finish | Thickness | P1 (181 × 181 mm) | P2 (384 × 384 mm) | P3 (790 × 384 mm) |
|---|---|---|---|---|
 American walnut | 0.6 mm | €4.20 | €15.90 | €24.80 |
 bamboo natural (striped) | 0.6 mm | €4.90 | €17.90 | €27.91 |
 European beech | 0.6 mm | €3.40 | €11.80 | €19.80 |
 teak (crown grain) | 0.6 mm | €5.90 | €18.90 | €34.80 |
 wenge | 0.6 mm | €5.90 | €22.88 | €36.90 |
Sheet prices incl. VAT. Your cut costs sheet plus laser time — you see the fixed price live when uploading or modelling.
Quick answers
Which thicknesses does Decoflex veneer come in?
0.6 mm — 1 thicknesses across 5 variants of colour and finish. You pick the thickness while designing; it drives both price and cutting time.
Which sheet sizes do you cut on?
Three formats: P1 181 × 181 mm, P2 384 × 384 mm, P3 790 × 384 mm. Your design has to fit one of these sheets — larger objects get split into several parts.
What does Decoflex veneer cost?
A sheet starts at €3.40 (P1), €11.80 (P2) and €19.80 (P3), each including VAT. What you pay for is the cutting: area, cutting length, engraving, setup and shipping — calculated before you order.
Can Decoflex veneer be engraved?
Yes, both as vector engraving and as raster engraving. In your file the colour drives the laser: red hairlines are engraved as lines, black filled areas as surfaces.
Do I get the whole sheet?
No. You receive your cut parts, not the rest of the sheet. The sheet price is the basis for the calculation, not the scope of delivery.
Knowledge for this material
- Which material survives outdoors
An honest suitability matrix across our range: what withstands UV, rain and frost — and what is unusable after one winter.
- Allowing for kerf
Why laser-cut tab joints wobble even though the drawing is correct — and how to compensate for the kerf in your file.
- Which material thickness
Why 3 mm is the standard, when 5 mm becomes necessary and why thicker material costs disproportionately more.