GS or XT?
Cast acrylic (GS) is harder, engraves with high contrast and can be bonded with little stress. Extruded acrylic (XT) is cheaper and more even in thickness. XT is enough for panes and covers; for engraving and signs, choose GS.
Acrylic sheet cut to size
Rectangle, circle, ring or heart: choose the shape, enter the dimensions and order directly. We laser-cut your acrylic to the millimetre – in 66 variants from 0.5 to 8 mm.
- · Laser-cut, glossy edge
- · Up to 780 × 374 mm in one piece, larger depending on stock
- · From 1 piece, volume price applied automatically
- · Shipping in Germany €5.90, free from €50.00
Cut to size from €3.65
Calculate the price and order directly
The price appears instantly and is the same as at checkout. Dimensions from 20 mm, up to 780 × 374 mm in one piece, holes from 2 to 12 mm.
Material
Thickness
Material
Colour
€7.94
for 1 piece, incl. VAT
plus shipping €5.90 within Germany, free shipping from €50.00
Prices incl. VAT. Cut pieces are made to measure – there is no right of withdrawal.
Example prices for acrylic cut to size
Price per part including VAT, excluding shipping. Below it, the unit price for 10 pieces.
| Size | Acrylic glass XT colorless, transparent, 3 mm | Acrylic glass XT colorless, transparent, 5 mm |
|---|---|---|
| 100 × 100 mm | €3.65€2.05 each for 10 pieces | €5.84€4.24 each for 10 pieces |
| 300 × 200 mm | €7.94€6.22 each for 10 pieces | €14.40€12.61 each for 10 pieces |
| 600 × 300 mm | €15.95€13.70 each for 10 pieces | €29.60€26.17 each for 10 pieces |
Cut pieces without holes. The price depends on area, cutting length and material – the calculator above shows it for your size.
What you get
Glossy laser edge
The laser melts the cut edge smooth. With acrylic, this gives a clear, glossy edge without burrs – no finishing needed.
True to size
We compensate for the laser's cutting width. Your part has the dimensions you enter.
Any shape
Rectangle with corner radius, circle, ring, oval, polygon, semicircle, heart or star – and your own drawing in the Modeller.
Holes in the same go
Holes in the corners, at the top or in the centre, 2 to 12 mm – the laser cuts them in the same pass. In the configurator you place them freely.
From one piece
No minimum order value. The unit price drops automatically with quantity, up to 999 pieces per order line.
From our workshop
Cut in our workshop in Pfinztal, checked by people, well packed and shipped with DHL.
Shapes
Each shape has its own page with prices and typical sizes.
Types of acrylic
66 variants: clear, coloured, satin, fluorescent, mirrored and two-colour – cast (GS) or extruded (XT).
Guide: having acrylic cut to size
The edge
On acrylic the laser leaves a glossy edge, clear and without burrs. On thick sheets it is very slightly angled, because the beam widens towards the underside.
Size and tolerance
The contour has the dimensions you enter; we compensate for the cutting width. Sheet thickness varies from the manufacturing process – more with cast acrylic than with extruded. For fits with tight clearance there is precision acrylic.
Holes and spacing
The laser cuts holes in the same pass, as round as drilled ones – from 2 to 12 mm. A web remains between hole and edge, at least 6 mm for 3 mm material – otherwise the acrylic breaks. The calculator checks this for you.
Bonding
You bond acrylic with acrylic adhesive. Laser edges are under stress: with solvent-based adhesive, extruded acrylic in particular tends to develop fine cracks; cast acrylic (GS) copes better.
Cleaning
With water, a little washing-up liquid and a soft cloth. No alcohol and no glass cleaner containing spirit – it makes acrylic crack.
Outdoors
Acrylic is UV-resistant and does not yellow. For outdoor signs and house numbers, 3 to 5 mm cast acrylic has proven itself.
What acrylic is cut to size for
From replacement panes to front panels – each page starts the calculator with suitable presets.
- Front panelsFor electronics, enclosures and word clocks – with holes.
- Display coversProtection for displays, measuring instruments and clocks.
- Replacement panesFor display cabinets, picture frames, furniture and appliances.
- SignsDoor signs, company signs, notice signs.
- Model makingWindows, display cases and parts for models.
How to order your acrylic cut to size
- 1
Choose a shape
Rectangle, circle, ring or one of the other shapes.
- 2
Dimensions and material
Enter dimensions, corner radius and holes, choose thickness and colour. The price appears instantly.
- 3
Add to cart
Collect several cut pieces; the unit price drops with quantity. Shipping within Germany €5.90, free from €50.00; for shipping abroad, the checkout shows the price.
- 4
Cut and shipped
We cut in our workshop and send you the parts well packed.
Several parts, free hole placement, your own shape?
In the cut-to-size configurator you put together up to 20 different parts, place holes freely and round each corner individually. For your own contours, engraving and text there is the Modeller.
Go to the cut-to-size configuratorFrequently asked questions about acrylic cut to size
How large can a cut piece be?
Up to 780 × 374 mm in one piece. If the material is in stock in the large workshop format, up to 890 × 440 mm is possible – the calculator tells you. At least 20 mm; you split larger areas into tiles in the Modeller.
Which thicknesses are available?
From 0.5 to 8 mm, depending on type and colour. The material picker in the calculator shows which thicknesses a colour comes in.
What does the cut edge look like?
Glossy and clear. The laser melts the edge smooth while cutting – no polishing needed.
How accurate is the cut?
The contour matches the dimensions you enter; we compensate for the laser's cutting width. The sheet thickness has the manufacturer's tolerance.
Can I order holes as well?
Yes. In the calculator in the corners, at the top or in the centre; in the configurator placed freely. Diameter 2 to 12 mm.
Is there a minimum order value?
No, you can order a single part. Shipping within Germany costs €5.90; from an order value of €50.00 it is free. For other countries, the checkout shows the shipping price for your delivery address.
Is it cheaper for several pieces?
Yes. The unit price drops automatically with quantity, because more parts fit on one sheet. The calculator shows you the price per piece.
Can I withdraw from my order?
A piece cut to your dimensions is made to measure. Under German law there is no right of withdrawal for it (§ 312g Abs. 2 Nr. 1 BGB); you confirm this at checkout.
What is the difference between GS and XT?
GS is cast, harder and better for engraving. XT is extruded, cheaper and more even in thickness.
Can I have my own shapes cut as well?
Yes. Upload your drawing or draw it in the Modeller – same laser, same materials.
Knowledge about acrylic
- Cast or extruded acrylicCast or extruded: differences in engraving, thickness tolerance, stress cracking and price — and when each makes sense.
- Thickness tolerance in acrylicWhy 3 mm acrylic may be anywhere between 2.3 and 3.7 mm thick, what makes extruded XT more accurate and when precision acrylic at ±0.1 mm is worth it.
- Slotting, screwing or gluingWhich joint holds in laser-cut panels — and why superglue leaves acrylic hazy and crazed.
- Reading acrylic colour codesWhat 9H01, 5C18 or WH02 mean: colour family, light transmission and the special cases you will meet in the range.
- Display windows and viewing panesTransparent cut parts for displays, cabinets and replacement panes: thickness, scratch resistance, reflection and mounting.