Mylar
1 variant, thicknesses: 0.3 mm. Cut on the P1–P3 formats, price shown live while you design.
- Laser cutting
- Vector engraving
- Raster engraving
kerf
The laser vaporizes material — the cutting gap varies with material and thickness. Cuts run centered on the drawn line; for shape.tools products we factor the kerf into your dimensions automatically.More in the glossary →P1–P3 sheet formats
Our three sheet formats: P1 = 181 × 181 mm, P2 = 384 × 384 mm, P3 = 790 × 384 mm. Your design has to fit on one of the sheets. For scale: a vinyl record cover sits between P1 and P2.More in the glossary →
How Mylar lasers
Standardised photos of the real material — same motifs, same light, so you can compare materials.
Test cuts 
Transparency 
Top view 
Engraving 
Cut edges
raster engraving
The laser fills an area line by line — like a printer. Ideal for logos and larger motifs. In your file: black filled areas, RGB(0, 0, 0).More in the glossary →vector engraving
The laser traces a line and engraves it into the material — precise, ideal for fine contours. In your file: red hairlines, RGB(255, 0, 0).More in the glossary →Good to know
Description
Mylar® is made from polyethylene terephthalate (PETP). The film is tensile- and tear-resistant, dimensionally stable, resistant to the most common solvents as well as heat and cold — it is even used for aroma-tight food packaging.
We particularly recommend Mylar for stencils: it lasers beautifully and, thanks to its low thickness, adapts flexibly to any surface.
Good to know
We advise against engraving of any kind: it is barely visible on this material and can deform the film considerably.
Bridges
For small parts under 15 × 15 mm, plan small bridges: interrupt the cut contour by at least 0.5–0.8 mm. All parts then stay safely in the sheet until they reach you — push them out by hand or free them carefully with a craft knife.
Variants & sheet prices
| Color / finish | Thickness | P1 (181 × 181 mm) | P2 (384 × 384 mm) | P3 (790 × 384 mm) |
|---|---|---|---|---|
 grey-white, translucent | 0.3 mm | €2.59 | €9.20 | €16.90 |
Sheet prices incl. VAT. Your cut costs sheet plus laser time — you see the fixed price live when uploading or modelling.
Quick answers
Which thicknesses does Mylar come in?
0.3 mm — 1 thicknesses across 1 variants of colour and finish. You pick the thickness while designing; it drives both price and cutting time.
Which sheet sizes do you cut on?
Three formats: P1 181 × 181 mm, P2 384 × 384 mm, P3 790 × 384 mm. Your design has to fit one of these sheets — larger objects get split into several parts.
What does Mylar cost?
A sheet starts at €2.59 (P1), €9.20 (P2) and €16.90 (P3), each including VAT. What you pay for is the cutting: area, cutting length, engraving, setup and shipping — calculated before you order.
Can Mylar be engraved?
Yes, both as vector engraving and as raster engraving. In your file the colour drives the laser: red hairlines are engraved as lines, black filled areas as surfaces.
Do I get the whole sheet?
No. You receive your cut parts, not the rest of the sheet. The sheet price is the basis for the calculation, not the scope of delivery.
Related materials
More materials from the same catalogue group as Mylar — for a direct comparison.
Knowledge for this material
- Allowing for kerf
Why laser-cut tab joints wobble even though the drawing is correct — and how to compensate for the kerf in your file.
- Which material thickness
Why 3 mm is the standard, when 5 mm becomes necessary and why thicker material costs disproportionately more.