Acrylic mirrors cut to size
Mirrored acrylic in the shape you want: lighter and more shatter-resistant than a glass mirror – for decor, wall mirrors and children's rooms.
- · Laser-cut, glossy edge
- · Up to 780 × 374 mm in one piece, larger depending on stock
- · From 1 piece, volume price applied automatically
- · Shipping in Germany €5.90, free from €50.00
Cut to size from €5.39
Calculate the price and order directly
The price appears instantly and is the same as at checkout. Dimensions from 20 mm, up to 780 × 374 mm in one piece, holes from 2 to 12 mm.
€16.53
for 1 piece, incl. VAT
plus shipping €5.90 within Germany, free shipping from €50.00
Prices incl. VAT. Cut pieces are made to measure – there is no right of withdrawal.
Prices: Acrylic mirrors cut to size
Price per part including VAT, excluding shipping. Below it, the unit price for 10 pieces.
| Size | Acrylic glass XT mirror mirror, 3 mm |
|---|---|
| 100 × 100 mm | €5.39€3.78 each for 10 pieces |
| 300 × 200 mm | €16.53€14.46 each for 10 pieces |
| 600 × 300 mm | €38.12€34.02 each for 10 pieces |
Cut pieces without holes. The price depends on area, cutting length and material – the calculator above shows it for your size.
Mirrors without glass
Mirrored acrylic has its mirror coating on the back. It weighs less than half as much as glass and doesn't shatter – good for children's rooms, bathrooms and decor. For an undistorted reflection it needs a flat, solid backing; hanging freely, large surfaces flex slightly.
Colours and thicknesses
- Acrylic glass XT mirror mirror, 3 mm
Shapes
Each shape has its own page with prices and typical sizes.
Types of acrylic
66 variants: clear, coloured, satin, fluorescent, mirrored and two-colour – cast (GS) or extruded (XT).
What acrylic is cut to size for
From replacement panes to front panels – each page starts the calculator with suitable presets.
- Front panelsFor electronics, enclosures and word clocks – with holes.
- Display coversProtection for displays, measuring instruments and clocks.
- Replacement panesFor display cabinets, picture frames, furniture and appliances.
- SignsDoor signs, company signs, notice signs.
- Model makingWindows, display cases and parts for models.
How to order your acrylic cut to size
- 1
Choose a shape
Rectangle, circle, ring or one of the other shapes.
- 2
Dimensions and material
Enter dimensions, corner radius and holes, choose thickness and colour. The price appears instantly.
- 3
Add to cart
Collect several cut pieces; the unit price drops with quantity. Shipping within Germany €5.90, free from €50.00; for shipping abroad, the checkout shows the price.
- 4
Cut and shipped
We cut in our workshop and send you the parts well packed.
Several parts, free hole placement, your own shape?
In the cut-to-size configurator you put together up to 20 different parts, place holes freely and round each corner individually. For your own contours, engraving and text there is the Modeller.
Go to the cut-to-size configuratorFrequently asked questions about acrylic cut to size
How do I mount an acrylic mirror?
Ideally bonded over the full surface with solvent-free mirror adhesive on a flat backing, or with screws through holes that you order at the same time. Solvents attack the mirror coating.
How large can a cut piece be?
Up to 780 × 374 mm in one piece. If the material is in stock in the large workshop format, up to 890 × 440 mm is possible – the calculator tells you. At least 20 mm; you split larger areas into tiles in the Modeller.
Which thicknesses are available?
From 0.5 to 8 mm, depending on type and colour. The material picker in the calculator shows which thicknesses a colour comes in.
What does the cut edge look like?
Glossy and clear. The laser melts the edge smooth while cutting – no polishing needed.
How accurate is the cut?
The contour matches the dimensions you enter; we compensate for the laser's cutting width. The sheet thickness has the manufacturer's tolerance.
Knowledge about acrylic
- Cast or extruded acrylicCast or extruded: differences in engraving, thickness tolerance, stress cracking and price — and when each makes sense.
- Thickness tolerance in acrylicWhy 3 mm acrylic may be anywhere between 2.3 and 3.7 mm thick, what makes extruded XT more accurate and when precision acrylic at ±0.1 mm is worth it.
- Slotting, screwing or gluingWhich joint holds in laser-cut panels — and why superglue leaves acrylic hazy and crazed.
- Reading acrylic colour codesWhat 9H01, 5C18 or WH02 mean: colour family, light transmission and the special cases you will meet in the range.
- Display windows and viewing panesTransparent cut parts for displays, cabinets and replacement panes: thickness, scratch resistance, reflection and mounting.