Acrylic glass scratch-resistant
2 variants, thicknesses: 2 / 3 mm. Cut on the P1–P3 and Q formats, price shown live while you design.
- Laser cutting
- Vector engraving
- Raster engraving
kerf
The laser vaporizes material — the cutting gap varies with material and thickness. Cuts run centered on the drawn line; for shape.tools products we factor the kerf into your dimensions automatically.More in the glossary →P1–P3 and Q sheet formats
Our four sheet formats: P1 = 181 × 181 mm, P2 = 384 × 384 mm, P3 = 790 × 384 mm, Q = 900 × 450 mm. Your design has to fit on one of the sheets. For scale: a vinyl record cover sits between P1 and P2.More in the glossary →Good to know
Description
Colourless, extruded acrylic glass with a scratch-resistant coating on one side. The coated side stands up to scratches and cleaning agents far better than ordinary acrylic — good for protective screens, covers and surfaces that get touched a lot.
Because of the coating, this acrylic cannot be bent; it stays flat. Plan engravings on the uncoated back.
Cleaning
No glass cleaners — they roughen and dull the surface. Use warm water with washing-up liquid or a dedicated plastic cleaner. Stubborn dirt comes off with white spirit or isopropyl alcohol (2-propanol, available at any pharmacy).
Protective film
Acrylic glass always ships with a peelable protective film. Detach small parts from the film carefully — delicate pieces can break otherwise.
Bridges
For small parts under 15 × 15 mm, plan small bridges: interrupt the cut contour by at least 0.5–0.8 mm. All parts then stay safely in the sheet until they reach you — push them out by hand or free them carefully with a craft knife.
Variants & sheet prices
| Color / finish | Thickness | P1 (181 × 181 mm) | P2 (384 × 384 mm) | P3 (790 × 384 mm) | Q (900 × 450 mm) |
|---|---|---|---|---|---|
colorless, transparent, scratch-resistant on one side (0A570 HC)available soon | 2 mm | €1.94 | €8.72 | €17.95 | €23.95 |
colorless, transparent, scratch-resistant on one side (0A570 HC)available soon | 3 mm | €2.77 | €12.46 | €25.62 | €34.21 |
Sheet prices incl. VAT. Your cut costs sheet plus laser time — you see the fixed price live when uploading or modelling.
Quick answers
Which thicknesses does Acrylic glass scratch-resistant come in?
2 / 3 mm — 2 thicknesses across 2 variants of colour and finish. You pick the thickness while designing; it drives both price and cutting time.
Which sheet sizes do you cut on?
Four formats: P1 181 × 181 mm, P2 384 × 384 mm, P3 790 × 384 mm, Q 900 × 450 mm. Your design has to fit one of these sheets — larger objects get split into several parts.
What does Acrylic glass scratch-resistant cost?
A sheet starts at €1.94 (P1), €8.72 (P2), €17.95 (P3) and €23.95 (Q), each including VAT. What you pay for is the cutting: area, cutting length, engraving, setup and shipping — calculated before you order.
Can Acrylic glass scratch-resistant be engraved?
Yes, both as vector engraving and as raster engraving. In your file the colour drives the laser: red hairlines are engraved as lines, black filled areas as surfaces.
Can Acrylic glass scratch-resistant be bent?
No. Acrylic glass scratch-resistant cannot be bent with our bending process, so the “Bend” tool is not offered for this material. Acrylic up to 6 mm (except mirror), PET-G and polypropylene can be bent.
Do I get the whole sheet?
No. You receive your cut parts, not the rest of the sheet. The sheet price is the basis for the calculation, not the scope of delivery.
Related materials
More materials from the same catalogue group as Acrylic glass scratch-resistant — for a direct comparison.
Knowledge for this material
- Cast or extruded acrylic
Cast or extruded: differences in engraving, thickness tolerance, stress cracking and price — and when each makes sense.
- Which material survives outdoors
An honest suitability matrix across our range: what withstands UV, rain and frost — and what is unusable after one winter.
- Allowing for kerf
Why laser-cut tab joints wobble even though the drawing is correct — and how to compensate for the kerf in your file.